Xarunta mashiinka nooca 5-axis Vision Wide
Xarunta Mashiinka Nooca Gantry ee Taxanaha 5-axis ee GSF, waxay bixisay waxqabad saxnaan oo isku mar ah oo 5-axis ah oo heer sare ah oo loogu talagalay mashiinka 5-axis ee jarista caaryada, dhammaystirka qaab-dhismeedka oo aad u sax ah, shiididda, qodista, iyo taabashada. Vision Wide waxay soo saartay xarunta mashiinka 5-axis si ay si wax ku ool ah u soo gaabiso safarka iyo habka goynta qalabka una dheereyso cimriga qalabka waxayna bixisaa doorashada ugu fiican ee mashiinka xagasha isku dhafan. Taxanaha GSF wuxuu lahaa waxqabad firfircoon oo heer sare ah oo ku saabsan hal-xagal oo qaab-dhismeed ah oo saxnaan sare leh oo qalabaysan si loo gaaro waxqabadka saxnaanta isku mar ee 5-axis.
Madax 2-dhidib ah oo joogto ah
Saxnaanta isku-dubaridka wareegga firfircoon ee 5-axis (TCPM) 0.04mm.
Spindle-ka ku dhex jira oo si toos ah loogu wado dhidibka B&C, xawaaraha spindle-ka waa 15,000 ~ 24,000rpm.
Wadista aan lahayn laalaabka gadaal ee dhidibka B/C, Saxnaanta booska wareegga ± 5″.
Dhererka miiska oo hooseeya, aagga shaqada oo u dhow, iyo ballaca albaabka oo ballaaran ayaa ah naqshado ku habboon isticmaalayaasha.
Qalabka wareejinta chip-ka nooca silsiladda ah (caadiga ah) wuxuu awood u leeyahay inuu si hufan uga saaro jajabyada birta.
Codsiyada Warshadaha:
Qaab-dhismeedka Hawada Sare-Aluminium
Gawaarida - Qalabka Shaambadaynta
Qaybta Farsamada
Faahfaahinta:
| Moodel | Cutubka | GSF-1627 | GSF-2227 | GSF-3027 | GSF-4027 | GSF-5027 | GSF-6027 |
| Safarka X dhidibka | mm | 1,600 | 2,200 | 3,000 | 4,000 | 5,000 | 6,000 |
| Safarka dhidibka Y | mm | 2,700 | |||||
| Safarka dhidibka Z | mm | 1,000/1,200 | |||||
| Cabbirka jadwalka | mm | 1,600 x 2,700 | 2,200 x 2,700 | 3,000 x 2,700 | 4,000 x 2,700 | 5,000 x 2,700 | 6,000 x 2,700 |
| Culayska ugu badan ee miiska | kg/m2 | 3,000 | |||||
| Awoodda matoorka isbaarada (S1/S6) | kW | 50/65 | |||||
| Xawaaraha dunmiiqa | rpm | 15,000 | |||||
| Goynta federaalka | mm/daqiiqad | 1-20,000 | |||||
| Socod degdeg ah (X/Y/Z) | m/daqiiqad | XY:32 / Z:20 | |||||
| Awoodda ATC | kumbuyuutarro | 20/32/40/60 | |||||
| Moodel | Cutubka | GSF-2232 | GSF-3032 | GSF-4032 | GSF-5032 | GSF-6032 |
| Safarka X dhidibka | mm | 2,200 | 3,000 | 4,000 | 5,000 | 6,000 |
| Safarka dhidibka Y | mm | 3,200 | ||||
| Safarka dhidibka Z | mm | 1,000/1,200 | ||||
| Cabbirka jadwalka | mm | 2,200 x 3,200 | 3,000 x 3,200 | 4,000 x 3,200 | 5,000 x 3,200 | 6,000 x 3,200 |
| Culayska ugu badan ee miiska | kg/m2 | 3,000 | ||||
| Awoodda matoorka isbaarada (S1/S6) | kW | 50/65 | ||||
| Xawaaraha dunmiiqa | rpm | 15,000 | ||||
| Goynta federaalka | mm/daqiiqad | 1-20,000 | ||||
| Socod degdeg ah (X/Y/Z) | m/daqiiqad | XY:32 / Z:20 | ||||
| Awoodda ATC | kumbuyuutarro | 20/32/40/60 | ||||
Qalabka caadiga ah:
| Xakamaynta HEIDENHAIN TNC640 |
| HEIDENHAIN DCM (La socodka Shilalka Firfircoon) |
| 15,000 rpm HSK-A100 spindle |
| Nidaamka ilaalinta la socodka dhexe ee madaxa 2-dhidibka ah: |
| La socodka gariirka sita isbuunyada |
| La socodka heerkulka isbuunyada iyo matoorka |
| La socodka heerkulka matoorka B/C-dhidibka |
| Ilaalinta software-ka goynta xawaaraha |
| Nidaamka magdhowga kulaylka ee isbuunyada iyo qaab-dhismeedka |
| Nidaamka qaboojinta isbuunyada |
| Qalabka qaboojiyaha goynta giraanta isbuunyada (haddii aan madax ku xirnayn) |
| Qarax hawo ah oo dhex mara dunka |
| Nidaamka magdhowga wareega ee madaxa 2-dhidibka |
| Safarka dhidibka Z 1,000 mm |
| Nidaamka qaboojinta boolal kubbadda |
| Dhidibka X/Z waxaa wada matoor kubbadeed oo laba jibbaaran, dhidibka Y waxaa wada matoor kubbadeed oo hal jibbaaran. |
| Tilmaamaha toosan ee dhidibka X/Y/Z |
| Qalabka taageerada boolal kubbadda dhidibka X (dhidibka 4m kor) |
| Miisaanka laba-toosan ee X dhidibka, miisaanka toosan ee Y/Z dhidibka |
| Ilaalinta xadka adag ee safarka XYZ |
| Nidaamka saliidaynta otomaatiga ah ee dhexe |
| Ururiyaha saliidda saliidda madaxa-bannaan |
| Qoriga dhaqidda iyo isku-xirka pneumatic-ka |
| Joornaalka qalabka nooca toosan 20T oo leh nooca gacanta ATC |
| Guddiga hawlgalka nooca gacanta ee wareegaya |
| Matoor garaaca gacanta oo la dhaqaajin karo |
| Qaboojiyaha hawada ee golaha korontada |
| Nalalka shaqada |
| Dhammaystirka wareegga hawlgalka iyo iftiinka digniinta |
| Is-dhexgalka RJ45 |
| Ilaaliyaha birta ah ee xaashida ku lifaaqan oo aan lahayn saqaf |
| Nooca boolal ee gudbiyaha jajabka ah ee dhinacyada miiska |
| Nooca nooca caterpillar chip conveyor / Haanta biyaha |
| Nidaamka qaboojinta dareeraha ee jarista |
| Footswitch-ka loogu talagalay qalabka lagu xiro |
| Heerka software-ka la socodka fog |
| Shaqada korontada otomaatiga ah |
| Shaqada dib u noqoshada dhidibka Z marka korontada la waayo |
| Qalabka aasaaska iyo boolal |
| Qalabka hagaajinta iyo qalabka |
| Buugaagta farsamada (hawlgalka, buug-gacmeedka dayactirka iyo jaantuska wareegga) |
Qalabka ikhtiyaariga ah:
| 24,000 rpm HSK-A63 spindle |
| 12,000 rpm HSK-A100 spindle |
| Safarka dhidibka Z 1,200 mm |
| Joornaalka qalabka nooca toosan 32/40/60T oo leh nooca gacanta ATC |
| Nidaamka qaboojiyaha ee dhex mara wareegga: 20 bar / 60 bar |
| Qalabka qaboojinta ceeryaamo saliidda |
| Mashiinka saliidda lagu buufiyo |
| Qalabka boolal ee daab Helical ah ee dhinacyada miiska saaran |
| Nooca suunka laba-laabka ah ee gudbiyaha jajabka / Haanta biyaha |
| iyada oo aan lahayn jajab jajab ah / iyada oo aan lahayn jajab gudbiye / iyada oo aan lahayn taangi |
| Suufka cagta oo ka sarreeya godka jajabka |
| Gaari jajab ah |
| Ilaaliyaha birta xaashida ah oo leh saqaf |
| Miiska shaqada ee hoose |
| Matoor garaaca gacanta oo madax-bannaan oo XYZ ah |
| Barnaamijka la socodka fog-xirfadeed |
| Cabbirka dhererka qalabka otomaatiga ah |
| Cabbirka isku-dubbaridka shaqada otomaatiga ah |
| Barnaamijka sixitaanka otomaatiga ah ee qaladka dhidibka wareega |
| Qalabka ilaalinta gariirka isgoysyada |
| Transformer-ka |
| Qalabka dib-u-warshadaynta ceeryaamo saliidda |
| Shaqada mashiinka quudinta caqliga leh |
Qaybaha alaabta
-
Iimayl
-
Whatsapp