Taxanaha xarunta machining shan-dhidib
Halbeegga farsamada
| Halbeegga farsamada | Unug | SXH-U500 | SXH-U650 |
| Safarka dhidibka X/Y/Z | mm | 500/450/450 | 800/520/460 |
| B leexleexda wareegtada taayirrada | ° | ﹢120~﹣110 | ﹢120~﹣120 |
| Wareegga dhidibka-C | ° | 360 | 360 |
| Spinal sanka si uu u shaqeeyo | mm | 150-600 | 200-660 |
Spinal
| Foomka wadista Spindle-ka | Nooca la dhisay | Nooca tooska ah ee la isku daray | |
| Foomka gacanta qalabka | HSK-A630 | HSK-A63 | |
| Xawaaraha lafdhabarta | rpm | 24000 | 24000 |
nidaamka ATC
| Awoodda majaladda qalabka | T | 32 | 32 |
| Tilmaamaha qalabka | HSK-A63 | HSK-A63 | |
| Dhererka ugu sarreeya | mm | 250 | 250 |
| Dhexroorka ugu sarreeya (qalabka ku dheggan madhan) | mm | ∅76 (∅125) | ∅76 (∅125) |
Awoodda matoorka
| Matoorka Spindle-ka (oo socda/30 daqiiqo) | Kw | 25 | 30 |
| dhidibada X/Y/Z awoodda motor | Kw | 2.3/2.3/3.3 | 4.3/5.2/4.3 |
| Baaskiilka B/C | Kw | 17/11.4 | 17/11.4 |
dhidibka B/C
| Cabbirka miiska shan geesoodka ah | mm | ∅500 | ∅650 |
| Cabbirka daloolka dhexe | mm | ∅50H7*10 qoto dheer | ∅50H7*10 qoto dheer |
| T-slot(N*D*S) | mm | 7-63*14 | 5-100*18 |
| mugga shaqada | mm | ∅600 | ∅600 |
| Culayska ugu badan ee la shaqayn karo | kg | 300 | 300 |
Xawaaraha dhaqsaha badan
| Xawaaraha dhaqsaha badan ee X/Y/Z | m/min | 48/48/48 | 24/24/24 |
| dhidibka B/C xawli socod degdeg ah | rpm | 50/120 | 50/120 |
| Goynta xawaaraha quudinta | mm/min | 1-20000 | 1-8000 |
Saxnaanta
| Meelaynta saxnaanta | m/min | ±0.005/300 | ±0.005/300 |
| Xaqiijinta ku celcelinta | rpm | ± 0.003/300 | ± 0.003/300 |
Xakamaynta
| Nidaamka xakamaynta | SIEMENS840D | SIEMENS840Dadka kale |
Kuwo kale
| Wadarta miisaanka mashiinka | kg | 6500 | 9200 |
| Awoodda haanta biyaha | L | 200 | 300 |
| Cabbirka muuqaalka (L*W*H) | mm | 2200*2800*2600 | 3000*2900*2700 |
| Furaha ugu muhiimsan | KVA | 25 | 25 |
| Isha hawada | kg/cm² | ≥6 | ≥6 |
Halkan ku qor fariintaada oo noo soo dir
